SeaStone primer for a good base

SeaStone's adhesive primer range includes four adhesive primers, each with their own application. It is a balanced product that is applied prior to the processing of SeaStone Microcement. This greatly strengthens the bond between the surface and the microcement. The primers can all be applied with a brush, block brush or roller.

Learn more about it

SeaStone hechtprimer

A one-component preparation in a jerry can or canister that guarantees a good surface for painting or plastering or treatment with microcement. It is an ASF primer (All Surface Primer)

SeaStone adhesive primer is a product based on fine synthetic resins and modifiers.

The composition of the raw material allows the emulsion to penetrate deeply into the substrate and also strengthen it and eliminate its absorbency.

The surface coated with the primer has better adhesion for lime/chalk paint/plaster/microcement.


(SeaStone universal primer is suitable for highly absorbent substrates).


download processing sheet

SeaStone Texx

SeaStone Texx is an adhesive primer that has been specifically developed for application over existing tiling. The Texx has the same properties as our basic adhesive primer. Our basic adhesive primer and can also be applied over existing tiling, the Texx has an extra feature that makes the application easier on a smooth base. The Texx will stick after it dries and ensures a good grip during the application of the first layer. Perfect for processing on smooth surfaces.


Packaging 5/1 liter

ASF Primer (All Surface Primer)

General information SeaStone Adhesion Primers

SEASTONE PRIMERS:


Before any application, the substrate must be dry, clean, firm and free of grease. Make the right choice when it comes to primers.

If you have any doubts, please contact one of our dealers.


PRIMER UNIVERSAL: (for highly absorbent surfaces)

    Primer for absorbent substrates.To be applied by brush or roller in a single coat.Water-based, non-flammable.Free from plasticizers, solvents and ammonia.The product is supplied ready-to-use.Yield: 0,10 L/m2Drying time: at least half hours – maximum 24 hoursPackaging: 5 liter jerry can/1 liter


PRIMER NOT ABSORBENT:

    Primer for low and non-absorbent surfaces.To be applied by brush or roller in a single layer.Water-based, non-flammable.Free from plasticizers, solvents and ammonia.The product is supplied ready-to-use.The gauze or bilge tape can be “glued” ” with this primer. Yield: 0.09 L/m2 Drying time: minimum one hour – maximum 24 hours Packaging: 5 liter jerry can/1 liter


FIRST QUARTERS:

    Primer for smooth surfaces or substrates with low absorption. It provides a rough surface to ensure excellent adhesion. It can be used for the application of microcement, plaster, laying tiles on concrete, ceramics, hydraulic tiles… It is applied with a brush or a microfiber roller in one layer. The product is supplied ready to use, but must be stirred because of its quartz-containing nature. Yield: 0.25 l/m2, depending on the porosity of the substrate Drying time: at least half an hourPackaging: 5 liter bucket/1 liter


FIRST TEXX:

    Primer Texx is suitable for bonding to smooth substrates.Easy application by brush or roller in 1 coat.Alkali-resistant.ConsolidatingGreat adhesion to various substrates.Low sensitivity to water. Water-based, non-flammableFree from plasticizers, solvents and ammonia.The product is supplied ready-made.Yield: 0.10 L/m2Drying time: at least half an hourPackaging: 5 liter jerry cans/1 liter
Share by: